Electronic Product Online My Account  Cart Contents  Checkout  
  Home » 3 - Public Address and Paging » 3.8 Paging My Account  |  Cart Contents  |  Checkout   
Categories
  3.1 Complete Public Address Systems
  3.2 Speakers: Interior Design, Subwoofers, Paging
  3.3 Microphones
  3.4 Professional Mixers and Amplifiers
  3.5 Conference Systems
  3.6 Outdoor, Weatherproof Speakers
  3.7 Megaphones
  3.8 Paging
  3.9 Stage Speakers
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search

TOA VM-2240 240 W Five-Zone System Management Amplifier

 $1,242.40 
Quantity:
TOA VM-2240 240 W Five-Zone System Management Amplifier

The VM-2240 is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions (optional EV-200 Voice Announcement Board is required) in an emergency situation. Broadcast can be made from an optional RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features a surveillance function (optional SV-200M Surveillance Board is required) which automatically checks the system for failures.

Features:

  • Power Source: AC: 120 V AC, 50/60 Hz; DC: 24 V DC/15 A , M3.5 screw terminal, Barrier distance: 8 mm, Applicable cable diameter: AWG22 - AWG14
  • Power Consumption on AC Mains: With no signal present: 54 W; Under normal operating conditions according to EN60065: 1998 sec. 4.2: 255 W; With rated output signal: 549 W
  • Current Consumption on 24 V DC Power Input: With no signal present: 1 A; Under normal operating conditions according to EN60065: 1998 sec. 4.2: 5 A; With rated output signal: 14 A
  • Rated Output: 240 W
  • Output Voltage /Impedance: 100 V/83 Ω, 70 V/42 Ω, 50 V/21 Ω (selectable by the internal wiring change)
  • Frequency Response: 50 - 16,000 Hz
  • Distortion: Under 1%
  • Signal-to-Noise Ratio: Over 60 dB
  • Tone Control: Bass: 100 Hz 10 dB, Treble: 10 kHz 10 dB (Inputs 1 - 3 and BGM individually adjustable.)
  • Remote Microphone /Expansion Amplifier Connection:
    • 2 RJ45 female connectors for connecting the RM-200M Remote Microphone and the VM-2120 or VM-2240 unit used as an expansion amplifier.
    • Maximum distance: 800 m in total, Link cable: Category 5 Shielded
    • Number of connectable RM-200M's: Up to 4
    • Twisted-Pair straight cable (TIA/EIA-568A standard)
  • Input:
    • Inputs 1 - 3: -60 dB (0 dB= 1 V) (MIC)/-10 dB (0 dB= 1 V) (LINE) (changeable), 600 Ω, electronically balanced (Can be transformer-balanced with the addition of an optional IT-450 input transformer), combined XLR connector (female)/phone jack (Only Input 1 is additionally equipped with DIN connector (For connection of the Paging Microphone PM-660D with a remote control switch).)
    • Telephone paging input: Push-in terminal block (Usable cable diameter: AWG26 - AWG20, 0.5 mm)
    • Voice sound: -10 dB (0 dB= 1 V), 10 kΩ, electronically-balanced input with shield terminal (Can be transformer-balanced with the addition of an optional IT-450 input transformer)
    • Control: No-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: under 1 mA
    • BGM 1 - 2: -20 dB (0 dB= 1 V), 10 kΩ, RCA pin jack, monaural (internally mixed)
    • Power amplifier input: 0 dB (0 dB= 1 V), 10 kΩ, RCA pin jack
    • External speaker line input: 100 V line, for All-Zone Broadcast (This input is selected when the "Unit's broadcast cutoff" control is activated)
  • Output:
    • Speaker output: Plug-in screw connector (Usable cable diameter: AWG24 - AWG12, 2.5 mm)
    • 5-zone selector with attenuator (all zones simultaneously selectable)
    • Direct speaker line output: Direct output from the power amplifier output transformer (attenuator bypassed), Plug-in screw connector (Usable cable diameter: AWG24 - AWG12, 2.5 mm)
    • Line output: 0 dB(0 dB= 1 V), 10 kΩ, RCA pin jack
    • Recording output: 0 dB(0 dB= 1 V), 10 kΩ, RCA pin jack
    • Preamplifier output: 0 dB(0 dB= 1 V), 10 kΩ, RCA pin jack
  • Control Input: For controlling Inputs 1 - 3, Push-in terminal block No-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: under 1 mA
  • Control Input and Output
    • D-sub connector (25-pin, female)
    • Input: No-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: under 1 mA
    • Output: Open collector output, withstand voltage: 30 V DC, control current: under 10 mA
    • (1) External control input: Activation of messages (An optional EV-200 Voice Announcement Board is required. The chime sound source must be pre-recorded into a CF (CompactFlash) card to be inserted into the EV-200 Board), Activation of power, Activation and stop of Emergency Broadcast, Unit's broadcast cutoff (when activated by an external emergency equipment)
    • (2) Status output: Irregularity of communications with the Remote Microphone and an expansion amplifier, AC power condition, DC power condition, Irregularity of the sound source of the Voice Announcement Board, Failure (FAULT) indication on, Power switch on
  • External Attenuator Control Output: Plug-in screw connector(Usable cable diameter: AWG24 - AWG12, 2.5 mm), relay, no-voltage make contact output, transfer type, withstand voltage: 30 V DC, 125 V AC, contact current: under 7 A (DC), under 7 A (AC)
  • Surveillance Input and Output: D-sub connector (25-pin, female) Input: No-voltage make contact input, open voltage: 3.3 V DC, Output: Open collector output, withstand voltage: 30 V DC (An optional SV-200M Surveillance Board is required)
  • Power Supply: 24 V DC/0.1 A, for supplying power to an optional Amplifier Control Unit RU-2001/-2002, push-in terminal block(Usable cable diameter: AWG26 - AWG20, 0.5 mm)
  • Chime Tone: Built-in chime: 2-tone chime/2-tone chime (fast repeat)/4-tone chime (Up)/Single-tone chime/4-tone chime (Up & Down)/Gong/off; Voice Announcement Board sound source: Pre-recorded chime (An optional EV-200 Voice Announcement Board is required. The chime sound source must be pre-recorded into a CF (CompactFlash) card to be inserted into the EV-200 Board)
  • Function: Two units stacking (VM-2120 or VM-2240); Emergency broadcast (sequential control); Broadcast priority control; Surveillance (failure detection) function (An optional SV-200M Surveillance Board is required) Power supply to only one Remote Microphone (RM-200M); Line resistance: Under 40 Ω (one way)
  • Operating Temperature: 0C to +40C
  • Finish: Panel: ABS resin, dark grey (PANTONE 447C or its equivalent), paint; Case: Steel plate, dark grey (PANTONE 446C or its equivalent), paint
  • Dimensions: 419 (W) 143.3 (H) 355.7 (D) mm
  • Weight: 14.5 kg
  • Included accessories: Power cable (2 m), Miniature type time-lag fuse 6.3 A, Name label, Volume covers x 4
  • Optional accessories: Rack mounting bracket: MB-36, Input transformer: IT-450, Voice announcement board: EV-200, Surveillance board: SV-200M

Note: Delivery time for this product may be delayed, we will advise via e-mail.


This product was added to our catalog on Wednesday September 02, 2009.


Other products you may be interested in:
TOA IT-450 Input Transformer for VM-2000 Series (VM-2120 or VM-2240)
TOA IT-450 Input Transformer for VM-2000 Series (VM-2120 or VM-2240)
TOA SV-200MA Surveillance Board for VM-2000 Series (VM-2120 or VM-2240)
TOA SV-200MA Surveillance Board for VM-2000 Series (VM-2120 or VM-2240)
TOA RM-200M 5-Zone Remote Microphone for VM-2000 Series (VM-2120 or VM-2240)
TOA RM-200M 5-Zone Remote Microphone for VM-2000 Series (VM-2120 or VM-2240)
TOA VM-2120 120 W Five-Zone System Management Amplifier
TOA VM-2120 120 W Five-Zone System Management Amplifier
TOA RM-210 Extension Unit for RM-200M, VM-2000 Series (VM-2120 or VM-2240)
TOA RM-210 Extension Unit for RM-200M, VM-2000 Series (VM-2120 or VM-2240)
TOA MB-36 Rack Mount Bracket for VM-2120 or VM-2240
TOA MB-36 Rack Mount Bracket for VM-2120 or VM-2240
TOA EV-200M Digital Voice Announcer Board for VM-2000 Series (VM-2120 or VM-2240)
TOA EV-200M Digital Voice Announcer Board for VM-2000 Series (VM-2120 or VM-2240)
Information
Shipping & Returns
Site Policies
Privacy Notice
Refurbished?
All Products
Contact Us
Shopping Cart more
0 items
Manufacturer Info
TOA
Other products
Currencies

Note: you must use Canadian currency if using an American Express credit card.

Copyright © 2003-2014 Electronic Product Online Ltd.
info@electronicproductonline.com
Products may not be exactly as shown.
Powered by osCommerce